FixVault
Home › Kia › 2009 › Sorento Base, A5SR2 › Repair and Diagnosis › Engine Mechanical › Mechanical › Cylinder Block › Repair Procedures › Removal

Repair Procedures: Removal

CAUTION:
  • Use fender covers to avoid damaging painted surfaces.
  • To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
NOTE:
  • Mark all wiring and hoses to avoid misconnection.
  • Inspection the timing belt before removing the cylinder head.
  • Turn the crankshaft pulley so that the No. 1 piston is at top dead center.
  1. Remove exhaust manifold.
  2. Remove intake manifold.
  3. Remove timing chain.
  4. Remove water temperature control assembly.
  5. Remove cylinder head.
  6. Remove oil pump.
  7. Remove oil filter assembly.
  8. Remove A/C compressor (A) from engine.
    Fig 1: Identifying A/C Compressor
    G06407756Courtesy of KIA MOTORS AMERICA, INC.
  9. Remove alternator (A) from engine.
    Fig 2: Identifying Alternator
    G06407757Courtesy of KIA MOTORS AMERICA, INC.
  10. Remove power steering pump (A) from engine.
    Fig 3: Identifying Power Steering Pump
    G06407758Courtesy of KIA MOTORS AMERICA, INC.
About FixVault