Repair Procedures: Removal
CAUTION:
- Removal of the airbag must be performed according to the precautions/procedures described previously.
- Before disconnecting the side impact sensor connector(s) , disconnect the side airbag connector(s) .
- Do not turn the ignition switch ON and do not connect the battery cable while replacing the side impact sensor.
- Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
- Remove the lower anchor bolt.
- Remove the following parts. (Refer to
INTERIOR
)
- Door scuff trim, Center pillar trim
- Disconnect the Side Impact Sensor connector and remove the Side Impact Sensor mounting bolt.