FixVault
Home › Kia › 2009 › Sorento Base, A5SR2 › Repair and Diagnosis › Restraints › Restraints Control Systems › SRS Control Module (Air Bag) › Troubleshooting › Description › Hi-Scan Check

Hi-Scan Check

  1. Turn the ignition switch off.
  2. Connect the Hi-Scan Pro connector to the data link connector located under the crash pad.
    Fig 1: Connecting Hi-Scan Pro Connector To Data Link Connector
    G06409886Courtesy of KIA MOTORS AMERICA, INC.
  3. Turn the ignition switch on and power on the Hi-Scan Pro.
  4. Read DTCs.
  5. Find and repair the trouble, and clear the DTCs using Hi-Scan Pro.
  6. Disconnect the Hi-Scan Pro.
  7. Confirm proper system operation;
    1. Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
About FixVault