FixVault
Home › Kia › 2009 › Spectra5 2.0 1, Standard › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › BCM (Body Control Module) › ETACS Module › Repair Procedures › Replacement

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver's lower crash panel (Refer to CRASH PAD ).
  3. Disconnect the ETACM connectors (B).
  4. Loosen the connector mounting bolts (A).
    Fig 1: Locating Connector Mounting Bolts And ETACM Connectors
    G06401059Courtesy of KIA MOTORS AMERICA, INC.
  5. Loosen the mounting bolts
  6. Remove the ETACM (A) after disconnecting the connector.
    Fig 2: Identifying ETACM Location
    G06401060Courtesy of KIA MOTORS AMERICA, INC.
  7. Installation is the reverse of removal procedures.
About FixVault