FixVault
Home › Kia › 2010 › Forte EX, Automatic › Repair and Diagnosis › External Pages › Different variant/trim › Section 4 (Automatic Transaxle Control System - A5CF2) › Input Speed Sensor › Repair procedures › Removal

Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery terminal.
  2. Remove the battery and battery tray.
  3. Remove the air duct.
  4. Remove the air cleaner assembly. (Refer to AUTOMATIC TRANSAXLE SYSTEM - A5CF2 )
  5. Remove the input speed sensor connector (A).
    Fig 1: Identifying Input Speed Sensor Connector
    G06494635Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the input speed sensor (A).
    Fig 2: Identifying Input Speed Sensor
    G06494636Courtesy of KIA MOTORS AMERICA, INC.
About FixVault