FixVault
Home › Kia › 2010 › Forte EX, Automatic › Repair and Diagnosis › External Pages › Different variant/trim › Section 4 (Automatic Transaxle Control System - A5CF2) › Output Speed Sensor › Repair procedures › Removal

Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery terminal.
  2. Remove the battery and battery tray.
  3. Remove the air duct.
  4. Remove the air cleaner assembly. (Refer to AUTOMATIC TRANSAXLE SYSTEM - A5CF2 )
  5. Remove the output speed sensor connector (A).
    Fig 1: Identifying Output Speed Sensor Connector
    G06494640Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the output speed sensor (A).
    Fig 2: Identifying Output Speed Sensor
    G06494641Courtesy of KIA MOTORS AMERICA, INC.
About FixVault