Service Standard
SERVICE STANDARD
| Item | mm(in) |
|---|---|
| Input shaft end play (front) | 0.7~1.25 (0.0276~0.0492) |
| Input shaft end play (rear) | 0.25~0.45 (0.0098~0.0177) |
| Second brake pressure plate end play | 1.05~1.35 (0.0413~0.0531) |
| Low&Reverse brake pressure plate end play | 1.65~1.95 (0.0650~0.0768) |
| Reduction brake snap ring end play | 1.05~1.35 (0.0413~0.0531) |
| Underdrive clutch snap ring end play | 1.2~1.4 (0.0472~0.0551) |
| Overdrive clutch snap ring end play | 0.9~1.1 (0.0354~0.0433) |
| Direct clutch snap ring end play | 1.15~1.45 (0.0453~0.0571) |
| Reverse clutch snap ring end play | 1.2~1.4 (0.0472~0.0551) |