General Information: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item	Detecting Condition	Possible Cause
DTC Strategy	Voltage range check	Open in signal harness Open in ground harness Poor connection or damaged harness Faulty Heated O2 Sensor (HO2S)
Enable Conditions	Downstream O2 sensor operative readiness detected Downstream O2 sensor pre-heating phase finished No relevant failure 10V < Battery voltage < 16V
Threshold Value	0.37 V < VLS_DOWN < 0.48 V and O2 Sensor Element resistance > 60 kOhm
Diagnostic Time	30 sec.
Mil On Condition	2 Driving Cycles