FixVault
Home › Kia › 2010 › Rio Base › Repair and Diagnosis › Restraints › Restraints Control Systems › Restraint System › Occupant Classification Sensor (OCS) › Repair procedures › Installation

Repair procedures: Installation

  1. Install the OCS equipped seat cushion.

    (Refer to FRONT SEAT )

  2. Install the front seat assembly. (Refer to FRONT SEAT )
  3. Reconnect the battery negative cable.
  4. After installing the OCS, confirm proper system operation : Turn the ignition switch ON, the SRS indicator should be turned on for about six seconds and then go off.

    Telltale lamp will turn on for 4 seconds and be turned off afterward.

About FixVault