FixVault
Home › Kia › 2010 › Rondo EX, 2.7 6 › Repair and Diagnosis › Accessories & Equipment › Communication Devices › BCM (Body Control Module) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to CRASH PAD )

  3. Remove the body control module (A) after loosening 2 nuts and disconnecting connector.
    Fig 1: Identifying Body Control Module & Nuts
    G06385453Courtesy of KIA MOTORS AMERICA, INC.
About FixVault