FixVault
Home › Kia › 2010 › Rondo EX, 2.7 6 › Repair and Diagnosis › Transmission › Transmission Control Systems › Automatic Transaxle Control System -- A5GF1 › Output Speed Sensor › Repair procedures (A5GF1) › Removal

Repair procedures (A5GF1): Removal

  1. Remove the battery terminal.
  2. Remove the battery and battery tray.
  3. Remove the air cleaner assembly. (See REPAIR PROCEDURES (A5GF1) ).
  4. Remove the output shaft speed sensor connector.
  5. Remove the output shaft speed sensor (A).
    Fig 1: Identifying Output Shaft Speed Sensor
    G06486986Courtesy of KIA MOTORS AMERICA, INC.
About FixVault