FixVault
Home › Kia › 2010 › Sedona Base › Repair and Diagnosis › Accessories & Equipment › Communication Devices › BCM (Body Control Module) › Body Network System › Repair procedures › Body Electrical System › Replacement › RAM (Rear Area Module)

RAM (Rear Area Module)

  1. Disconnect the negative (-) battery terminal.
  2. Remove the left luggage side trim

    (Refer to INTERIOR TRIM )

  3. Remove the RAM (A) after loosening the 7 connectors and the 3 RAM mounting bolts (A).
    Fig 1: Identifying RAM Mounting Bolts
    G06838842Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
About FixVault