FixVault
Home › Kia › 2010 › Sedona Base › Repair and Diagnosis › Accessories & Equipment › Memory Modules › IMS (Integrated Memory System) › IMS Control Switch › Repair procedures › Body Electrical System › Replacement

Body Electrical System: Replacement

  1. Remove the negative (-) battery terminal.
  2. Remove the front door trim panel in the car. (Refer to the FRONT DOOR )
  3. Remove the switch (A) mounting screws (3EA) after disconnecting the 16pin switch connector.
    Fig 1: Identifying Switch Screws
    G06838850Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the connector from the front door trim panel.
  5. Installation is the reverse of removal.
About FixVault