Water Temperature Control Assembly

NOTE: Make clean the contact face before assembly.

Install water temperature control assembly (B) and new gasket (A).
Tightening torque

18.62 ~ 23.52Nm (1.9 ~ 2.4kgf.m, 13.74 ~ 17.36lb-ft)

Fig 1: Identifying Water Temperature Control Assembly
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: Use new O-rings (C) when reassembling.
Connect water hoses to the water temperature control assembly.
Install wiring protector.
Connect ECT connector.
Connect radiator upper and lower hose (A).

Fig 2: Identifying Radiator Upper And Lower Hose
Courtesy of KIA MOTORS AMERICA, INC.
Install air cleaner assembly.
Fill with engine coolant.
Start engine and check for leaks.
Recheck engine coolant level.