FixVault
Home › Kia › 2010 › Sedona Base › Repair and Diagnosis › Restraints › Air Bag, SRS › Airbag Module › Driver Airbag (DAB) Module and Clock Spring › Repair procedures › Removal

Repair procedures: Removal

  1. Disconnect the battery negative cable and wait at least three minutes before beginning work.
  2. Remove the airbag module mounting bolts.
    Fig 1: Locating Airbag Module Mounting Bolts
    G06838327
  3. Disconnect the horn connector (A).
    Fig 2: Disconnecting Horn Connector
    G06838328
  4. Release the connector locking pin (B), then disconnect the driver airbag module connector (C).
    CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover face up.
  5. Remove the steering wheel and steering wheel column cover. .
  6. Disconnect the clock spring and horn connector, then remove the clock spring.
    Fig 3: Identifying Clock Spring And Horn Connector
    G06838329
About FixVault