FixVault
Home › Kia › 2010 › Sedona Base › Repair and Diagnosis › Restraints › Restraints Control Systems › Supplemental Restraints System Control Module (SRSCM) › Seat Belt Buckle Switch (BS › Repair procedures › Removal

Repair procedures: Removal

  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front seat assembly. (Refer to FRONT SEAT )
  3. Remove the seat recliner cover.
    Fig 1: Locating Seat Recliner Cover
    G06838319Courtesy of KIA MOTORS AMERICA, INC.
  4. Loosen the seat belt buckle mounting bolt and remove the seat belt buckle switch.
    Fig 2: Locating Seat Belt Buckle Mounting Bolt
    G06838320Courtesy of KIA MOTORS AMERICA, INC.
About FixVault