FixVault
Home › Kia › 2010 › Sedona LX › Repair and Diagnosis › Engine Performance › System › Engine Control System Diagnosis (2 Of 3) › DTC P0461: Fuel Level Sensor A Circuit Range/Performance › Scantool Diagnostics › Monitor Scantool Data

Monitor Scantool Data

  1. Ignition "OFF".
  2. Connect Scantool and Engine "ON".
  3. Monitor "FLS" parameter on Current Data.
    Fig 1: Scantool Display - Current Data
    G06836869Courtesy of KIA MOTORS AMERICA, INC.
  4. Is the "FLS" parameter displayed correctly?

    YES 

    • Fault is intermittent caused by poor contact in Sensor's and/or PCM's connector or was repaired and PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "Verification of Vehicle Repair" procedure.

    NO 

About FixVault