FixVault
Home › Kia › 2011 › Optima LX, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L › Camshaft Position Sensor (CMPS) › Repair Procedures › Removal › Bank 1/Intake

Bank 1/Intake

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
Fig 1: Camshaft Position Sensor Connector & Bolt (Bank 1/Intake)
G07381665Courtesy of KIA MOTORS AMERICA, INC.
About FixVault