Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Disconnect the crankshaft position sensor connector (A).

Fig 1: Crankshaft Position Sensor Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the protector (A).

Fig 2: Crankshaft Position Sensor Protector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the installation bolt (A), and then remove the crankshaft position sensor.

Fig 3: Crankshaft Position Sensor Bolt

Courtesy of KIA MOTORS AMERICA, INC.