Repair Procedures: Disassembly

WARNING: This page is about a different variant/trim than selected.

Remove the alternator cover (A) using a screw driver after loosening the nuts (B).

Fig 1: Alternator Cover & Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the mounting bolts (A) and disconnect the brush holder assembly (B).

Fig 2: Mounting Bolts & Brush Holder Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Remove the pulley (A) using the SST (09373-27000) (B).

Fig 3: Removing Pulley
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the 4 through bolts (A).

Fig 4: Identifying Through Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the rotor (A) and cover (B).

Fig 5: Rotor & Cover
Courtesy of KIA MOTORS AMERICA, INC.
Reassembly is the reverse order of disassembly.