General Information: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item	Detecting Condition	Possible Cause
DTC Strategy	Signal check	Poor connection Open or short to ground in power circuit Short to ground in signal circuit VSS PCM
Enable Conditions	(M/T or A/T) Engine speed during fuel cut-off 1520~3520rpm (only A/T at D or R position) Engine speed > 3000rpm, Engine load > 49.5% Coolant temperature > -48°C (-54.4 °F)
Threshold Value	Vehicle speed signal < 1.0 Km/h (0.62MPH)
Diagnostic Time	2 sec
MIL ON Condition	2 driving cycle