FixVault
Home › Kia › 2011 › Sorento Base, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L › Crankshaft Position Sensor (CKPS) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A).
    Fig 1: Identifying Crankshaft Position Sensor Connector
    G07415512Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the protector (A).
    Fig 2: Identifying Protector
    G07415513Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the installation bolt (A), and then remove the crankshaft position sensor.
    Fig 3: Identifying Installation Bolt
    G07415514Courtesy of KIA MOTORS AMERICA, INC.
About FixVault