FixVault
Home › Kia › 2011 › Sorento Base, Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L › Intake Air Temperature Sensor (IATS) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the surge tank.
    Fig 1: Identifying Manifold Absolute Pressure Sensor Connector And Installation Bolt
    G07415504Courtesy of KIA MOTORS AMERICA, INC.
About FixVault