Repair Procedures: Inspection: Notes

Disconnect the negative (-) battery terminal.
Remove the overhead console and roof trim.
(Refer to "ROOF TRIM ")
Remove the sunroof motor after removing the screws (3 EA) and connector (10P).

Fig 1: Sunroof Motor Connector End View
Courtesy of KIA MOTORS AMERICA, INC.
Ground the terminals as shown in Fig 2, and check that the sunroof unit operates.

Fig 2: Sunroof Motor Continuity Chart
Courtesy of KIA MOTORS AMERICA, INC.

Make these input tests at the connector

if any test indicates a problem, find and correct the cause, then recheck the system.

If all the input tests prove OK, the sunroof motor must be faulty; replace it.

INPUT TEST CHART

Terminal	Test condition	Test : Desired result
3	IG2 ON	Check for voltage to ground: There should be battery voltage
1	Under all conditions	Check for continuity to ground: There should be continuity.
6	Under all conditions	Check for voltage to ground: There should be battery voltage.