Sunvisor Replacement

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Put on gloves to protect your hands.

Remove the sunvisor.
1. Remove the sunvisor (A) and holder (B) from each side.
  
  Fig 1: Identifying Sunvisor & Holder
  Courtesy of KIA MOTORS AMERICA, INC.
Remove the assist handle.
1. Remove the covers (B), and remove the screws, then remove the assist handle (A).
  
  Fig 2: Identifying Assist Handle Covers
  Courtesy of KIA MOTORS AMERICA, INC.
  
  Fig 3: Identifying Assist Handle & Screws
  Courtesy of KIA MOTORS AMERICA, INC.
Remove the overhead console.
1. Remove the cover (A).
  
  Fig 4: Identifying Overhead Console Cover
  Courtesy of KIA MOTORS AMERICA, INC.
2. After loosening the overhead console mounting screws, remove the overhead console lamp (A).
  
  Fig 5: Identifying Overhead Console Lamp & Mounting Screws
  Courtesy of KIA MOTORS AMERICA, INC.
3. Disconnect the connectors (B).
  
  Fig 6: Identifying Overhead Console Lamp Connectors
  Courtesy of KIA MOTORS AMERICA, INC.
Remove the room lamp.
1. Remove the lens (A).
  
  Fig 7: Identifying Room Lamp Lens
  Courtesy of KIA MOTORS AMERICA, INC.
2. Remove the screws.
3. Pull out the room lamp (A).
  
  Fig 8: Identifying Room Lamp & Screws
  Courtesy of KIA MOTORS AMERICA, INC.
4. Disconnect the connector (B).
  
  Fig 9: Identifying Room Lamp Connector
  Courtesy of KIA MOTORS AMERICA, INC.
After loosening the mounting screws, remove the sunglass case (A).

Fig 10: Identifying Sunglass Case & Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connector (B).

Fig 11: Identifying Roof Trim Connector (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connector (A).

Fig 12: Identifying Roof Trim Connector (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the sunroof motor connector (B).

Fig 13: Identifying Sunroof Motor Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the roof trim (A).

Fig 14: Identifying Roof Trim
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Replace any damaged clips.