FixVault
Home › Kia › 2011 › Soul Base › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Air Conditioning System › Condenser › Repair procedures › Replacement › Condenser Assembly

Condenser Assembly

  1. Recover the refrigerant with a recovery/recycling/charging station.
  2. Disconnect the negative (-) battery terminal.
  3. Remove the front bumper. (Refer to FRONT BUMPER )
  4. Disconnect the refrigerant line (A).
    Fig 1: Identifying Refrigerant Line
    G06525767Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the mount bumper (A).
    Fig 2: Identifying Mount Bumper
    G06525768Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the condenser (A) by lifting it up. Be careful not to damage the radiator and condenser fins when removing the condenser.
    Fig 3: Removing Condenser
    G06525769Courtesy of KIA MOTORS AMERICA, INC.
  7. Install in the reverse order of removal, and note these items:
    1. If you're installing a new condenser, add refrigerant oil FD46XG.
    2. Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them. Be sure to use the right O-rings for R-134a to avoid leakage.
    3. Be careful not to damage the radiator and condenser fins when installing the condenser.
    4. Be sure to install the lower mount cushions of condenser securely into the holes.
    5. Charge the system, and test its performance.
About FixVault