FixVault
Home › Kia › 2012 › Forte LX, Automatic Trans › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Air Conditioning System › Condenser › Repair procedures › Replacement › Condenser Assembly

Condenser Assembly

  1. Recover the refrigerant with a recovery/recycling/charging station.
  2. Disconnect the negative (-) battery terminal.
  3. Remove the front bumper.

    Refer to FRONT BUMPER or FRONT BUMPER .

  4. Disconnect the refrigerant line (A).
    Fig 1: Refrigerant Line
    G07369587Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the radiator assembly.

    Refer to RADIATOR .

  6. Remove the condenser (A) by lifting it up. Be careful not to damage the radiator and condenser fins when removing the condenser.
    Fig 2: Lifting Up Condenser
    G07369588Courtesy of KIA MOTORS AMERICA, INC.
  7. Install in the reverse order of removal, and note these items :
    1. If you're installing a new condenser, add refrigerant oil ND-OIL8.
    2. Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them. Be sure to use the right O-rings for R-134a to avoid leakage.
    3. Be careful not to damage the radiator and condenser fins when installing the condenser.
    4. Be sure to install the lower mount cushions of condenser securely into the holes.
    5. Charge the system, and test its performance.
About FixVault