Repair Procedures: Replacement: Removal

WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Put on gloves to protect your hands.
Use seat covers to avoid damaging any surfaces.

Remove the following items:
1. Front pillar trim
  Refer to FRONT PILLAR TRIM REPLACEMENT .
2. Inside rearview mirror
  Refer to "MIRROR "
3. Rain sensor
  Refer to "RAIN SENSOR "
4. Wiper arm
  Refer to "COWL TOP COVER "
5. Cowl top cover
  Refer to "COWL TOP COVER "
6. Windshield glass deicer connector
Refer to "WINDSHIELD DEICER "
Using a screwdriver or remover, remove the windshield side molding (A).

Fig 1: Identifying Windshield Side Molding
Courtesy of KIA MOTORS AMERICA, INC.
Cut out the sealant using the sealant cutting tool (A) (09861-31100).

Fig 2: Cutting Out Sealant Using Sealant Cutting Tool
Courtesy of KIA MOTORS AMERICA, INC.
Remove the windshield glass (B) carefully using the glass holder (A).

Fig 3: Removing Windshield Glass Using Glass Holder

Courtesy of KIA MOTORS AMERICA, INC.