FixVault
Home › Kia › 2012 › Rio EX, 4D Hatchback › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Crankshaft Position Sensor (CKPS) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
Fig 1: Crankshaft Position Sensor Component Location, Connector And Mounting Bolts
G08321400Courtesy of KIA MOTORS AMERICA, INC.
About FixVault