FixVault
Home › Kia › 2012 › Rio EX, 4D Hatchback › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Purge Control Solenoid Valve (PCSV) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the purge control solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the purge control solenoid valve.
  4. Remove the valve after removing the bolt (C).
Fig 1: Purge Control Solenoid Valve Component Location, Connector, Vapor Hoses And Bolt
G08321462Courtesy of KIA MOTORS AMERICA, INC.
About FixVault