FixVault
Home › Kia › 2012 › Rio EX, 4D Hatchback › Repair and Diagnosis › Engine Performance › Engine Control Systems › Idle Stop & Go (ISG) System › Brake Switch › Repair procedures › Removal

Repair procedures: Removal

  1. Turn ignition switch OFF.
  2. Remove the crash pad lower panel. (Refer to CRASH PAD .
  3. Disconnect the stop lamp switch connector (A).
Fig 1: Identifying Stop Lamp Switch Connector
G08321538Courtesy of KIA MOTORS AMERICA, INC.
About FixVault