FixVault
Home › Kia › 2012 › Rio LX, 4D Hatchback, Automatic Trans › Repair and Diagnosis › Body & Frame › Door Locks › Smart Key System › Repair procedures › Inspection › Antenna Status Check

Antenna Status Check

  1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
  2. Select the "Antenna Status Check".
    Fig 1: Selecting Antenna Status Check
    G08322860Courtesy of KIA MOTORS AMERICA, INC.
  3. After IGN ON, select the "Antenna Status Check".
    Fig 2: Screen Display - Antenna Status Check
    G08322861Courtesy of KIA MOTORS AMERICA, INC.
  4. Set the smart key near the related antenna and operate it with a GDS.
    Fig 3: Screen Display - Inertia Antenna 1
    G08322862Courtesy of KIA MOTORS AMERICA, INC.
    Fig 4: Screen Display - Inertia Antenna 2
    G08322863Courtesy of KIA MOTORS AMERICA, INC.
  5. If the smart key runs normal, the related antenna, smart key(transmission, reception) and exterior receiver are normal.
  6. Antenna status
    1. INTERIOR Antenna 1
    2. INTERIOR Antenna 2
    3. Trunk antenna
    4. BUMPER/Antenna
    5. DRV_DR Antenna
    6. AST_DR Antenna
About FixVault