FixVault
Home › Kia › 2012 › Sorento Base, 2.4L Eng VIN 6, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L GDI › Accelerator Position Sensor (APS) (VIN 6) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation nuts (C), the bolt (B) and then remove the accelerator pedal module.
    Fig 1: Accelerator Position Sensor Connector And Nuts (VIN 6)
    G09764345Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Accelerator Position Sensor Connector And Bolt (VIN 6)
    G09764346Courtesy of KIA MOTORS AMERICA, INC.
About FixVault