FixVault
Home › Kia › 2012 › Sorento Base, 2.4L Eng VIN 6, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L GDI › Camshaft Position Sensor (CMPS) (VIN 6) › Repair Procedures › Removal › Bank 1/Intake

Bank 1/Intake

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
    Fig 1: Camshaft Position Sensor Component Location, Connector And Bolt (Bank 1/Intake) (VIN 6)
    G09764326Courtesy of KIA MOTORS AMERICA, INC.
About FixVault