FixVault
Home › Kia › 2012 › Sorento Base, 2.4L Eng VIN 6, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L GDI › Intake Air Temperature Sensor (IATS) (VIN 6) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the surge tank.
    Fig 1: Manifold Absolute Pressure Sensor Connector (VIN 6)
    G09764310Courtesy of KIA MOTORS AMERICA, INC.
About FixVault