FixVault
Home › Kia › 2012 › Sorento SX, FWD › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › Fob Holder › Repair procedures › Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the floor console (A).

    (Refer to "CONSOLE ")

    Fig 1: Identifying Floor Console
    G07416439Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the connector, then remove the fob holder assembly (A) after releasing the hook.
    Fig 2: Releasing Hook Of Fob Holder Assembly
    G07416440Courtesy of KIA MOTORS AMERICA, INC.
About FixVault