Repair procedures: Disassembly

Loosen the nuts (B) and then remove the cover (A).

Fig 1: Identifying Nuts And Cover
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the mounting bolts (A) and remove the regulator assembly (B).

Fig 2: Identifying Mounting Bolts And Regulator Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Remove the slip ring guide (A).

Fig 3: Identifying Slip Ring Guide
Courtesy of KIA MOTORS AMERICA, INC.
Using the SST (09373-27000), remove the pulley (A).

Fig 4: Removing Pulley Using SST (09373-27000)
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the 4 bolts (A) and then remove the rear housing (B).

Fig 5: Identifying Bolts And Rear Housing
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the rotor (A) and the housing (B).

Fig 6: Identifying Rotor And Housing
Courtesy of KIA MOTORS AMERICA, INC.
Reassembly is the reverse order of disassembly.