FixVault
Home › Kia › 2012 › Soul ! › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Crankshaft Position Sensor (CKPS) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor after removing the installation bolt (B).
    Fig 1: Crankshaft Position Sensor Connector And Bolt Component Location
    G08331045Courtesy of KIA MOTORS AMERICA, INC.
About FixVault