FixVault
Home › Kia › 2012 › Soul ! › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Delivery System - 2.0L › Accelerator Pedal › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation nuts (B), and then remove the accelerator pedal module.
    Fig 1: Identifying Installation Nuts And Accelerator Position Sensor Connector
    G08330327Courtesy of KIA MOTORS AMERICA, INC.
About FixVault