Repair Procedures: Reassembly
WARNING: This page is about a different car, the 2011 Hyundai Veracruz. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front shock absorber to SST (09546-26000).
- Assemble the components of the front strut assembly in sequence. (Refer to FRONT STRUT ASSEMBLY components)
- After seating the upper and lower ends of the coil spring in the upper and lower spring seat grooves correctly, tighten new self-locking nut.
Tightening torque:
60 ~ 70 N.m (6.0 ~ 7.0 kgf.m, 43 ~ 51 lb-ft)
- Install the insulator cap.
- Remove the special service tool.