FixVault
Home › Kia › 2013 › Forte LX, Automatic Trans › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Delivery System › Accelerator Pedal › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Accelerator Position Sensor Connector, Bolt & Nuts
    G07367876Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the mounting bolt (B) and nuts (C), and then remove the accelerator pedal from the vehicle.
About FixVault