FixVault
Home › Kia › 2013 › Optima SX › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Manifold Absolute Pressure Sensor (MAPS) › Repair Procedures › Inspection › Removal

Repair Procedures: Inspection: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolts (B), and then remove the sensor from the surge tank.
    Fig 1: Manifold Absolute Pressure Sensor Component Location, Connector & Bolts (MAPS #1)
    G07379718Courtesy of KIA MOTORS AMERICA, INC.
About FixVault