FixVault
Home › Kia › 2013 › Soul ! › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Accelerator Position Sensor (APS) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation nuts (B), and then remove the accelerator pedal module.
    Fig 1: Identifying Accelerator Position Sensor Connector And Nuts
    G08331069Courtesy of KIA MOTORS AMERICA, INC.
About FixVault