Repair Procedures: Removal
WARNING: This page is about a different car, the 2014 Kia Forte5 and 2014 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
- Release the residual pressure in fuel line.
(Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
CAUTION:- When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of "Release Residual Pressure in Fuel Line" work.
- Remove the intake manifold.
(Refer to "INTAKE MANIFOLD ")
- Remove the injector foam.
- Disconnect the rail pressure sensor connector (A), and then remove the sensor (B) from the delivery pipe.