Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Disconnect the knock sensor connector (A).

Fig 1: Knock Sensor Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the intake manifold (Refer to "INTAKE & EXHAUST SYSTEM ").
Remove the installation bolt (A), and then remove the sensor from the cylinder block.

Fig 2: Intake Manifold Installation Bolt
Courtesy of KIA MOTORS AMERICA, INC.