Neutralization Status Check

Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
After IG ON, select the "Neutralization mode".

Fig 1: Scantool Display - Neutralization Mode

Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Scantool Display - Select Left Side Menu

Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Scantool Display - ECM Neutralization

Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Scantool Display - ECM Neutralization Test Completed

Courtesy of KIA MOTORS AMERICA, INC.

Fig 5: Scantool Display - SKM Neutralization

Courtesy of KIA MOTORS AMERICA, INC.

Fig 6: Scantool Display - SKM Neutralization Pin Code

Courtesy of KIA MOTORS AMERICA, INC.

Fig 7: Scantool Display - SKM Neutralization Test Completed

Courtesy of KIA MOTORS AMERICA, INC.

Input Switch List

INPUT SWITCH REFERENCE CHART

No	Item name	Unit
1	SSB SW1	-
2	SSB SW2	-
3	ACC	-
4	IGN1	-
5	IGN2	-
6	ACC/IGN1/IGN2 Relay	-
7	Gear 'P' Position (A/T) Clutch SW (M/T)	-
8	Brake SW	-
9	FL Door Lock Button	-
10	FR Door Lock Button	-
11	Trunk Release Button	-
12	Battery Voltage	-
13	Wheel Speed	-

Actuator List

ACTUATOR REFERENCE CHART

No.	Item name	Condition
1	External Buzzer	Ignition switch ON Engine off
2	Interior Antenna 1 Active	Ignition switch ON Engine off
3	Interior Antenna 2 Active	Ignition switch ON Engine off
4	Trunk Antenna Active	Ignition switch ON Engine off
5	Bumper Antenna Active	Ignition switch ON Engine off
6	DRV_DR Antenna Active	Ignition switch ON Engine off
7	AST_DR Antenna Active	Ignition switch ON Engine off
8	BBS Illumination (OFF/ACC/ON)	Ignition switch ON Engine off
9	ACC/IGN1/IGN2 Relay