Repair procedures: Replacement

WARNING: This page is about a different variant/trim than selected.

Remove the front wheel & tire.
Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6 lb-ft)

Fig 1: Front Wheel & Tire
Courtesy of KIA MOTORS AMERICA, INC.

CAUTION: Be careful not to damage to the hub bolts when removing the front wheel & tire.
Remove the wheel speed sensor (B) from the front strut assembly by loosening mounting bolts (A).

Fig 2: Wheel Speed Sensor & Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the stabilizer link (B) from the front strut assembly (A) after loosening the nut.
Tightening torque:

98.1 ~ 117.7 N.m (10.0 ~ 12.0kgf.m, 72.3~86.8 lb-ft)

Fig 3: Stabilizer Link & Front Strut Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the front strut assembly (A) from the knuckle by loosening the bolt & nut.
Tightening torque:

156.9 ~ 176.5 N.m (16.0 ~ 18.0kgf.m, 115.7 ~ 130.2 lb-ft)

Fig 4: Front Strut Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front strut assembly and then loosen the strut mounting nuts (A).
Tightening torque:

53.9 ~ 73.5 N.m (5.5 ~ 7.5kgf.m, 39.8 ~ 54.2 lb-ft)

Fig 5: Strut Mounting Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.