FixVault
Home › Kia › 2014 › Sedona EX › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Purge Control Solenoid Valve (PCSV) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the purge control solenoid valve connector (A).
  3. Disconnect the vapor hoses (B, C) from the purge control solenoid valve.
  4. Remove the valve (B) from the bracket.
Fig 1: Purge Control Solenoid Valve, Connector & Hoses
G07395691Courtesy of KIA MOTORS AMERICA, INC.
About FixVault