FixVault
Home › Kia › 2014 › Sorento EX, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.3L › ETC (Electronic Throttle Control) System › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air intake hose.

    (Refer to "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts, and then remove the ETC module (C) from the engine.
    Fig 1: Identifying ETC Module, Coolant Hoses And ETC Module Connector
    G09765293Courtesy of KIA MOTORS AMERICA, INC.
About FixVault