FixVault
Home › Kia › 2014 › Soul Base, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L › Intake Air Temperature Sensor (IATS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the intake air temperature sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the surge tank.
    Fig 1: Identifying Intake Air Temperature Sensor Connector And Installation Bolt
    G09772961Courtesy of KIA MOTORS AMERICA, INC.
About FixVault